Advanced Search
Search Results
112 total results found
MyChild 6
MyChild 5.6
Resources for MyChild version 5.6 and above.
StaffWatch6
MyChild6-Clinical
MyChild 6-Admin
Users with admin permission levels only.
MyChild6 Install & Configuration
Clinical Orientation Notebook
MyChild 5.x Installation Guide
This book details the Installation of MyChild 5.6
MyChild 5.x Technical Troubleshooting Guide
This book outlines all of the troubleshooting steps for MyChild 5.6
StaffWatch6 - Clinical
StaffWatch6 - Admin
How To Apply a Tag
Patient Functions
Managing Users
Configuration
Tag Management
General Functions
This chapter should cover general user functions
Alarms
Install
Configuration
Updates / Upgrades
Troubleshooting
Microsoft SQL Server
MyChild Server Install
MyChild Workstation
Staff Functions
How To Use Tags
Alarms
Maintenance & Warranty Offerings
About StaffWatch
About MyChild
Cut-Band Tag Application, Removal, and Disinfection Guide
Click here to download the Cut Band Application Guide!
Bracelet Tag Application, Removal, and Disinfection Guide
Bracelet Tag Application, Removal, and Disinfection Guide Note: Applying a Bracelet Tag to a patient is done after the Tag’s battery is tested and after the Tag has been assigned to the patient. For more information on Tag battery testing, see How to Stor...
How To: Enroll a Patient
Patient will now have a status of "Active" and the total number of patients will be displayed on the dashboard. Other patient status are "Bypass" and "Tamper Suspended."
How to: Unenroll a Patient
After clicking "OK" you will receive a notification that the patient has been unenrolled. The page will then refresh and the patient will be removed from the patient directory.
What is Bypass?
MyChild provides a ByPass Mode that allows you to take a patient out of a protected area without setting off alarms. You must select a departing unit and a destination unit. These can be the same. The patient status changes from “Active” to “Bypass” when a pat...
How To: Suspend Tamper
MyChild provides a suspend tamper function which allows you to remove a tag temporarily without setting off alarms. To remove a cut-band or sensing tag temporarily, put the patient in SUSPEND TAMPER. The patient status changes from “Active” to “Tamper Suspende...
How To: Locate Patient
How To: Add Users
How To: Add new devices
Here we will be discussing the procedure for adding new devices to the MyChild6 software. This guide assumes that you have the following information available. Device Name Serial Number (or Mac Address) Bypass and Ajar settings (only for doors) Network set...
Software Settings
How To: Change Permission Levels
User profiles determine what each user sees on the MyChild software.
Floorplan Settings
How To: Disinfect Tags
Click here to download the Tag Disinfecting Procedures!
STEP Program
STEP – Simple Tag Exchange Program Never buy a tag! Let McRoberts manage your tags for you. STEP is a program in which McRoberts manages your tag inventory, testing and disinfecting and providestags for per-patient use with the MyChild infant protection syst...
How To: Store and Test Tags
After testing a tag, you can assign the tag to a patient at your workstation. TLM Testing The pocket tag tester can also be used to test and change the TLM mode. To turn the pocket tester on, press and hold ON/ACCEPT button and the UP button simul...
How To: Change your Password
How To: Enable 2FA
How To: Update SMS settings
Tummy Tag Application, Removal, and Disinfection Guide
Click here to download the Tummy Tag Application, Removal, and Disinfection Guide!
Alarm Overview
There are three categories of alarms; Patient, Device, and System. The alarm level indicates the severity of the alarm. Level 1 alarms notify you about events that could lead to a security breach. Level 1 alarms are indicated by pop-up notifications that disa...